Tygon 2475 High-Purity Tubing
| Manufacturer | Saint-Gobain |
|---|---|
| Product Line | Tygon |
Maintaining fluid integrity during transfer is critical in numerous pharmaceutical and biotechnology applications. Loss of fluid through migration into the tubing walls can cause inconsistencies in final product results. TYGON® 2475 High Purity Tubing is hydrophobic and will resist the absorption/adsorption of aqueous fluids. This reduction in absorption/ adsorption minimizes the risk of fluid alteration in single or repeat use applications.
Until now, clear, flexible tubing was restricted from use in many applications due to concern of plasticizer extraction. TYGON® 2475 High Purity Tubing is entirely free of any plasticizers. This unique tubing uses the latest in polymer technology to provide an entirely clear and flexible tubing choice for sensitive fluid transfer applications.
TYGON® 2475 High Purity Tubing is virtually unaffected by chemical sanitizers and cleaners. As a result, it can be cleaned repeatedly without decreasing its service life. The non-wettable surface of the product facilitates complete drainage of fluid during the cleaning process. TYGON® 2475 has a masterfile with the U.S Food and Drug Administration.
ADDITIONAL INFORMATION
Tygon 2475 Tubing Typical Applications
Tygon 2475 Tubing Typical Applications
- Sterile filling and dispensing systems
- Diagnostic equipment
- Laboratory analytical instrumentation
- Infusion sets for parenterals and drugs
- Cell and tissue culture transport
Tygon 2475 Typical Physical Properties
| Property | ASTM Method | Value or Rating |
|---|---|---|
| Durometer Hardness Shore A, 15 Sec | D2240-97 | 72 |
| Color | — | Clear |
| Tensile Strength psi (MPa) | D412-97 | 2,000 (13.8) |
| Ultimate Elongation, % | D412-97 | 700 |
| Tear Resistance lb-f/inch (kN/m) | D1004-93 | 220 (39) |
| Specific Gravity | D792-91 | 7/8 |
| Water Absorption, % 24 hrs. @ 23°C | D570-95 | <0.01 |
| Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. | D395-89 Method B | 84 |
| Brittleness by Impact Temp., °F (°C) | D746-95 | -108 (-78) |
| Maximum Recommended Operating Temp.,°F (°C) Operating Temp.,°F (°C) | — | 125 (52) |
| Low Temp. Flexibility, °F (°C) | D380-87 | -94 (-70) |
| Dielectric Strength °F (°C) | D149-93 | 587 |
| v/mil (kV/mm | -23 1/8 | |
| Tensile Modulus, @ 100% Elongation, psi (MPa) | D412-97 | 350 (2.4) |
| Tensile Set, % | D412-97 | 187 |
| Part Number | I.D. (inches) | O.D. (inches) | Wall Thickness (inches) | Length(feet) | Min Bend Radius (inches) | Max. Working Pressure at 73°F | Vacuum Rating In. at 73° |
|---|---|---|---|---|---|---|---|
| ACG00003 | 1/16 | 3/16 | 1/16 | 50 | 1/8 | 85 | 29.9 |
| ACG00007 | 1/8 | 1/4 | 1/16 | 50 | 1/4 | 50 | 29.9 |
| ACG00012 | 3/16 | 5/16 | 1/16 | 50 | 1/2 | 40 | 29.9 |
| ACG00017 | 1/4 | 3/8 | 1/16 | 50 | 1/4 | 30 | 29.9 |
| ACG00022 | 5/16 | 7/16 | 1/16 | 50 | 1 3/8 | 18 | 29.9 |
| ACG00027 | 3/8 | 1/2 | 1/16 | 50 | 1 3/4 | 20 | 25 |
| ACG00038 | 1/2 | 3/4 | 1/8 | 50 | 1 1/2 | 29 | 29.9 |
| ACG00046 | 5/8 | 7/8 | 1/8 | 50 | 2 1/4 | 25 | 29.9 |
| ACG00053 | 3/4 | 1 | 1/8 | 50 | 3 1/4 | 21 | 29.9 |
| ACG42064 | 1 | 1 3/8 | 3/16 | 25 | 3 | 20 | 29.9 |
